2017 Husqvarna® FC 350
POWER AND CONTROLThe FC 350 shares much of its engine and chassis architecture with the smaller FC 250 but with a maximum output of 58 hp, the FC 350 has a 450 rivalling power-to-weight ratio while keeping the light, agile handling of the 250. This is coupled with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package.
Features may include:- Engine
The 350 cc DOHC engine weighs in at only 27.2 kg with a maximum power output of 58 hp. The engine is specifically designed with performance, weight and mass centralisation as key areas. As a result, all shaft arrangements have been positioned to allow oscillating masses to occupy the ideal centre of gravity while all parts are engineered to offer the best performance while adding the least possible weight.
- Cylinder head
The FC 350 features a DOHC design with polished camshafts and DLC coated finger followers. These components significantly reduce friction and improve overall performance. Added to the design are large titanium valves (36.3 mm intake and 29.1 mm exhaust) which allow the engine to rev freely to the 13,400 rpm ceiling.
- Cylinder and piston
The 88mm bore cylinder features a large diameter and lightweight forged bridged-box-type piston produced by CP. As a result, the relatively low oscillating masses deliver exceptional power, high revs and a very wide power band. The compression ratio is 14:1.
- Crankshaft
A perfectly balanced crankshaft is at the heart of the high output, high-reving, FC 350 engine. A plain big end bearing comprising of two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours.
- Functional bodywork
Modern and functional bodywork with traditional Husqvarna blue and yellow accents mark a simplistic yet stylish Swedish design. The ergonomics have been specifically tailored to deliver high levels of comfort and control, enabling riders to perform at their peak for extended periods of time. The high grip seat cover keeps the rider positioned under hard acceleration or in slippery conditions.
- Lightweight frame
With years of experience in designing the most advanced steel frames in offroad, the engineers in Research and Development designed a chromium molybdenum steel frame that redefines all structural aspects that benefit handling, ergonomics and packaging. With carefully calculated tortional and longitudinal flex, the frame works in harmony with the suspension to offer sharp handling and superior comfort. These characteristics, matched to a lightweight and compact engine design, offer exceptional handling precision while at the same time increasing bump-absorption and feeling.
- Carbon fibre subframe
The use of carbon fibre strips away weight, improving weight distribution and bringing weight closer to the centre of gravity for precise handling. The composition of the material is 30% carbon fibre and the overall 3-piece construction is remarkably light but also very strong for an overall weight of 1.4 kg. Additionally, a specific rigidity has been calculated in the component for optimal handling and rider ergonomics.
- Swingarm
The hollow, cast aluminium swingarm is designed to offer optimal stiffness and reliability. The machining on the side by Husqvarna Motorcycle engineers is another mark of quality and superior craftsmanship.
- 2017
- Husqvarna®
- FC 350
- Base
- Off-Road
- 1-cylinder, 4-stroke engine
- 349.7 cm³
- 88 mm
- Electric starter
- Keihin EMS
- 5-speed
- 24:73
- Secondary: 14:50
- Wet, multi-disc clutch, Magura hydraulics
- 5/8 x 1/4"
- 25CrMo4 steel central-tube frame
- WP-USD, AER 48, Ø 48 mm
- 310 mm
- WP shock absorber with linkage
- 300 mm
- Brembo twin-piston floating calliper, brake disc
- Brembo single-piston floating calliper, brake disc
- 220 mm
- head angle: 63.9 °
- 1485 ± 10 mm
- 370 mm
- 960 mm
- 7 l
- 100.4 kg
- $5,499.00
- Simi Valley, California
- Pre-Owned
- 2017
- Husqvarna®
- FC 350
- 66
- 5-speed
- Available
WARNING: Operating, servicing and maintaining a passenger vehicle, an off-highway motor vehicle or a recreational marine vessel can expose you to chemicals including engine exhaust,
carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary,
service your vehicle or vessel in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle or vessel.
For more information go to https://www.p65warnings.ca.gov/products/passenger-vehicle
and https://www.p65warnings.ca.gov/products/marine.